HOME | FORUMS | REGISTER |

This is the MCRParts.com archive. To get back to our main site, please follow this link: Ford Mustang

Pages: 1

world windsor sr. heads
(Click here to view the original thread with full colors/images)

Posted by: 87stanger

does anyone know if i can use stock pushrods with these heads? and any idea how would the car run with factory speed density fuel injection...?

Posted by: Aussie XAXB

It is common for aftermarket heads to have a thicker deck surface. Whether or not this is factored into the valvetrain geometry I am not sure. You could install everything and then take a measurement between the lifter, at "0" lift, and the rocker. Here is a picture of how I measured mine with an inside micrometer. I did have to get different pushrods with GT-40 X305 heads and Harland Sharp roller rockers.

Steve