HOME | FORUMS | REGISTER |

This is the MCRParts.com archive. To get back to our main site, please follow this link: Ford Mustang

Pages: 1

1970 Front frame dimensions??
(Click here to view the original thread with full colors/images)

Posted by: 70coupe302

well i'm a newbie here and i'm in a bit of a jam. i have a 70 coupe that i'm in the middle of and it would be safe to call this clunker a basket case. i need the front frame dimensions for the car so when i weld the new rad. support and aprons in, the car is straight. if anybody has these or even knows where i may be able to get them i would appreciate it. i could "eye it up" but i would prefer NOT to go that route. thanks in advance!!

Posted by: siXXXd7coupe

man i got SO lucky with mine. i did it with a tape measure, a level and my mig welder. tacked it all up, fit the fenders aprons etc on and it was good! to i finished the welding and its good.. the engine went right in too. i put a full front frame on the pass side b/c there was none and the drivers side got patched and all new aprons. im NOT totally sure if they are the same dimensions but if they are ill gladly give you what my measurements are. let me know

Posted by: Aussie XAXB

See if this helps you out.

http://www.treasurecoastmustangs.com...framespecs.jpg

Steve