HOME | FORUMS | REGISTER |

This is the MCRParts.com archive. To get back to our main site, please follow this link: Ford Mustang

Pages: 1

Wont start
(Click here to view the original thread with full colors/images)

Posted by: VortechLX

Hey everyone. Ok, heres the problem, i have a 93 LX 5.0 and i recently added a trickflow intake, 30# injectors and MAF, and also TB and EGR plate. When i put them on, the car ran, but not that great, it would bog down off the line. The other day i replace the plugs, wires, cap and rotor. When i started the car it ran really rough for about 10 seconds, then died out, and will not start again. I don't know if i might have messed up the firing order, because i've been told that there are 2 different firing orders. I know it's getting fuel because that's all i smell when i was trying to start it. And i checked for spark and it has spark. Any idea's will be greatly apreciated. Thank you.

Posted by: badass98svt

My guess is firing order.
The 93 should only have 1 firing order.

http://www.muscularmustangs.com/2005/firingorder.php

Posted by: Mustang5L5

The Mustang uses the 351 firing order, not the 302 low-output firing order.

Only one firing order for the Mustang, but two for the 5.0 in general

it's 1-3-7-2-6-5-4-8

Posted by: calypsoLX

TFI module on the distributer, those are known to be problems. Can a ask if u got heads or a stroker? 30lb injectors are pretty big if you just did an intake swap

Posted by: 95Cobraman1024

you had to remove the dizzy for the intake install; it could off a tooth or two. check your timing.

Posted by: bullitt5177

Holy old thread Batman!!

It was the fuel pump.